Chameleon Headlight Overlays - 2015-2020 WRX/STI

Chameleon Headlight Overlays – 2015-2020 WRX / STI

Color-Shifting Style for Your Headlights

Transform your factory 2015-2020 WRX/STI headlights with these chameleon overlays that shift between blues and greens depending on viewing angle. This alternative to aftermarket headlights delivers a custom look.

The subtle color-shifting effect creates a distinctive appearance that sets your vehicle apart.

Features:

• Color-shifting chameleon finish (blue to green)
• Precision-cut for 2015-2020 WRX/STI headlights
• Dual protective layers prevent scratches during installation

Installation Instructions:

Recommended: Professional installation due to lens curvature. DIY installation is possible with patience and proper technique.

Ideal Conditions:

• Warm environment (70°F or above) for easiest installation
• Cooler temps (45-70°F) require more heat gun/hair dryer use

Installation Steps:

1. Prep – Wet your fingers with soapy water to prevent oils and smudges on the adhesive
2. Remove Bottom Layer – Peel protective film from adhesive side
3. Apply – Start from inner corners; do not wet the material itself
4. Squeegee – Use your fingers (not hard tools) to push out air bubbles and avoid scratching
5. Heat as Needed – Use minimal heat from hair dryer or heat gun to conform to curves
6. Remove Top Layer – Once fully dried and adhered, peel off top protective film

Note: Two protective layers are included. The bottom layer protects adhesive, and the top layer protects the finish during installation. Remove the bottom first to install, then remove the top after installation is complete.