StickerFab Fog Light Overlays | 2024+ Tacoma / 2025+ 4Runner

StickerFab Fog Light Overlays for Tacoma & 4Runner

Change the look of your factory fog lights with your choice of colored or smoked overlays. Choose snap-in Acrylic Version 2 for a removable lens accent or vinyl for a wet-applied overlay.

Check Your Fog Lamps First

• Listed for 2024+ Toyota Tacoma and 2025+ Toyota 4Runner with the compatible factory fog lamp configuration
• Not compatible without modification with RIGID lamps on Pro / Trailhunter models
• Confirm your lamp configuration before ordering

Choose Your Material & Color

• Acrylic Version 2: Amber, yellow, fluorescent yellow, smoked, prismatic pink, purple, or green. Clips into place using four tabs.
• Vinyl: Amber, orange / deep amber, yellow, or dark smoke LX+. Installs using a wet application.
• Sold as a pair, with an extra set included as stated in the supplied listing

Colored overlays change light output color. Deep amber provides the strongest amber-like color with reduced light output. Check applicable lighting requirements before use.

Acrylic Version 2 Installation

1. Clean the original lens with a wax-free detailing spray.
2. Slip the bottom tabs into place, then press the top in. Ensure all four tabs sit behind the plastic bumper cover.
3. To remove, apply upward pressure to the bumper cover and reverse the installation sequence.

Vinyl Installation

1. Clean the lens and remove wax residue. Install in shade at 70°F or warmer.
2. Wet the vinyl and lens with application fluid or water containing one drop of soap per cup.
3. Slide into alignment and gently squeegee out the water, working slowly to remove bubbles.
4. Allow to dry, then check that all edges are secure. Use only gentle heat if needed.

A microfiber cloth and felt-tip squeegee are recommended for vinyl installation.

Watch the Acrylic Version 2 installation video or view the fog light comparison video.